Technical Specifications - Stud Welding Products
🔧 Technical Specifications - Stud Welding Products
Our stud welding products are engineered to meet the highest standards of quality and performance. Below are the detailed technical specifications for our complete range of stud welding equipment and accessories.
📊 Welding Stud Specifications
| Stud Type | Material | Diameter Range | Length Range | Tensile Strength |
|---|---|---|---|---|
| Mild Steel Studs | Low Carbon Steel | M3 - M25 | 10mm - 200mm | ≥400 MPa |
| Stainless Steel Studs | 304/316 SS | M3 - M20 | 10mm - 150mm | ≥520 MPa |
| Aluminum Studs | 6061/5056 Alloy | M4 - M16 | 12mm - 100mm | ≥290 MPa |
⚡ Welding Equipment Specifications
ZC-CD Series (Capacitor Discharge)
- Power Supply: 220V/380V, 50/60Hz
- Welding Current: 200-2000A
- Welding Time: 1-10ms
- Stud Diameter: M3-M22
- Weight: 15-25kg
- Protection: IP54
ZC-DA Series (Drawn Arc)
- Power Supply: 220V/380V, 50/60Hz
- Welding Current: 300-1500A
- Welding Time: 0.3-2.0s
- Stud Diameter: M6-M25
- Weight: 20-35kg
- Protection: IP54
🎯 Performance Standards
Compliance Standards:
- AWS D1.1: Structural Welding Code - Steel
- ISO 13918: Welding - Studs and ceramic ferrules for arc stud welding
- EN ISO 14555: Welding - Arc stud welding of metallic materials
- ASTM A108: Standard Specification for Steel Bar
- DIN 32501: Stud welding; drawn-arc stud welding
🔬 Material Properties
| Material | Yield Strength | Elongation | Hardness | Operating Temp |
|---|---|---|---|---|
| Mild Steel | ≥235 MPa | ≥22% | 120-180 HB | -40°C to +150°C |
| 304 Stainless | ≥205 MPa | ≥40% | ≤200 HB | -196°C to +800°C |
| 6061 Aluminum | ≥240 MPa | ≥8% | 95 HB | -50°C to +200°C |
📐 Dimensional Tolerances
- Diameter Tolerance: ±0.05mm
- Length Tolerance: ±0.5mm
- Thread Pitch: ISO metric standard
- Surface Finish: Ra ≤ 3.2μm
- Straightness: ≤0.1mm per 100mm length
For detailed drawings and custom specifications, please contact our technical team at markko@studweldingzc.com